TGauto Mower Deck Belt 481558 Fits for Scag 481558 Turf Tiger with 61″ Deck – Kevlar Cord Belt
$35
- Belt Dimension: 5/8in Width x 140in Length
- Replaces OEM Part Numbers: Scag 481558
- Also Replaces: Ref No B137, Goodyear 851400, Dayco L5140, Gates 69140
- Compatible with Scag Turf Tiger with 61 inch Mower Deck
10 reviews for TGauto Mower Deck Belt 481558 Fits for Scag 481558 Turf Tiger with 61″ Deck – Kevlar Cord Belt
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
TGauto Mower Deck Belt 481558 Fits for Scag 481558 Turf Tiger with 61″ Deck – Kevlar Cord Belt
$35



Laura wamser –
Works well and good price. Thanks and God bless!
Sully –
Looks like a good quality belt but time will tell. I’m reading many negative reviews regarding V-Belts. Many are not holding up and are coming apart with very little use. Sounds like a quality issue.
Bryan Kean –
100percent garbage. Was so warped and distorted when taken out of package. Very rigid Once installed on the mower it vibrated and bounced around and would eventually flip over on itself. Lesson learned .spend the bucks on a stens.
Bill May –
I finally got around to comparing this to the worn belt I took off my mower this past spring. I got this as a back-up or to have it when I need it in a few years. Side by side, it is a perfect match for my old one. If it had been slightly longer or shorter it would have worked due to the tension spring – but it is an exact match.
Amazon Customer –
Perfect fit. Looks good. Only time will tell about the durability of this item.
darin g. weise –
Don’t usually write reviews but this belt lasted a total of 25 minutes in dry 3″ tall grass. Looks good when it arrived but looks and quality are too different things. Garbage. Would give no stars if possible. Total waste of time installing this belt.
Edgar Dillon –
The belt is as described. It works well.
andrea –
ok
Fix-it Man –
The Kevlar cover has fallen off the belt after my second mowing, jamming in the pulleys causing the belt to jump off and entangle in the mower blades. I ripped off the remaining Kevlar cover from the belt so I can finish mowing my lawn. However, the belt is smaller in thickness, so the mower blades do not spin as fast and slip under thick mowing conditions., causing the mowing to take longer than usual.
06/22/25 UPDATE: The belt has fully broken in many places on my third attempt to mowing my lawn. Will look for a quality mower belt for my X350 JD lawn tractor. My advice, DO NOT buy a cheap belt.
Bryan –
NOT A KEVLAR BELT, HAS A PAINTED ON COATING TO LOOK LIKE KEVLAR BUT ONE SPIN AROUND THE PULLYS AND THE PAINTED ON FINISH IS GONE, JUST A STANDARD LOW GRABE BLACK RUBBER BELT, I RETURNED IT IMMEDIATLY